หน่วยสมรรถนะ
หน่วยสมรรถนะ
Preventative Maintaining Component of Mechanical Equipment and Auxiliary System
สาขาวิชาชีพอุตสาหกรรมปิโตรเลียมและปิโตรเคมี
รายละเอียดหน่วยสมรรถนะ
1. รหัสหน่วยสมรรถนะ | PTC-ZZZ-5-025ZA |
2. ชื่อหน่วยสมรรถนะ | Preventative Maintaining Component of Mechanical Equipment and Auxiliary System |
3. ทบทวนครั้งที่ | N/A / N/A |
4. สร้างใหม่ | ปรับปรุง |
5. สำหรับชื่ออาชีพและรหัสอาชีพ (Occupational Classification) | |
N/A
|
6. คำอธิบายหน่วยสมรรถนะ (Description of Unit of Competency) | |
N/A |
7. สำหรับระดับคุณวุฒิ |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
---|---|---|---|---|---|---|---|
8. กลุ่มอาชีพ (Sector) | |
N/A |
9. ชื่ออาชีพและรหัสอาชีพอื่นที่หน่วยสมรรถนะนี้สามารถใช้ได้ (ถ้ามี) | |
N/A |
10. ข้อกำหนดหรือกฎระเบียบที่เกี่ยวข้อง (Licensing or Regulation Related) (ถ้ามี) | |
N/A |
11. สมรรถนะย่อยและเกณฑ์การปฏิบัติงาน (Elements and Performance Criteria) |
หน่วยสมรรถนะย่อย (EOC) | เกณฑ์ในการปฏิบัติงาน (Performance Criteria) | รหัส PC (ตามเล่มมาตรฐาน) |
รหัส PC (จากระบบ) |
---|---|---|---|
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
1. Corrective repairs are performed according to jobscope, company /manufacturer/ Health, Safety and Environment work practices,specific application and area classification | PPM5/2-1.01 | 10555 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
2. Physical inspection meets company/manufacturer/industry parameters | PPM5/2-1.02 | 10556 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
3. Confine space is verified according to standard andregulation | PPM5/2-1.03 | 10557 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
4. Configuration is verified according to the application | PPM5/2-1.04 | 10558 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
5. Calibration is verified according to engineeringspecifications with certified standards when applicable. | PPM5/2-1.05 | 10559 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
6. Functional test meets company/manufacturer/industrystandards | PPM5/2-1.06 | 10560 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
7. Known inputs result in expected outputs as specified bythe manufacturer | PPM5/2-1.07 | 10561 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
8. Documentation is completed according to companyguidelines | PPM5/2-1.08 | 10562 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
9.Equipment isprepared for maintenance work including shut down, drain, purge, clean andLock out/Tag out according to company policy | PPM5/2-1.09 | 10563 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
10. Disassembly/Assembly for repair or replace with spareparts (and accessory i.e. Mechanical seal, centrifugal and rotary pump orcompressor). | PPM5/2-1.10 | 10564 |
PPM5/2-1 Maintain rotating equipment and auxiliary system (1) - Fan/Blower - Compressor - Pump - Gas turbine & steam turbine - Extruder - Mixer & Agitator - Separator (tri-canting) - Heavy Equipment & Engine - Machine shop - Shaft seal (Mechanical and API piping plan) - Mechanic component (Bearing, Filter, transmission part, gasket) |
11. Installation, coupling alignment, flange alignment,test run or performance test and handover (additional new rotating equipmentinstallation) | PPM5/2-1.11 | 10565 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
1. Corrective repairs are performed according to jobscope, company /manufacturer/ Health, Safety and Environment work practices,specific application and area classification | PPM5/2-2.01 | 10566 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
2. Physical inspection meets company/manufacturer/industry parameters | PPM5/2-2.02 | 10567 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
3. Confine space is verified according to standard andregulation | PPM5/2-2.03 | 10568 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
4. Configuration is verified according to the application | PPM5/2-2.04 | 10569 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
5. Calibration is verified according to engineeringspecifications with certified standards when applicable. | PPM5/2-2.05 | 10570 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
6. Functional test meets company/ manufacturer/industrystandards | PPM5/2-2.06 | 10571 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
7. Known inputs result in expected outputs as specified bythe manufacturer | PPM5/2-2.07 | 10572 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
8. Documentation is completed according to companyguidelines | PPM5/2-2.08 | 10573 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
9.Equipment isprepared for maintenance work including shut down, drain, purge, clean andLock out/Tag out according to company policy | PPM5/2-2.09 | 10574 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
10. Disassembly/Assembly for repair or replace with spareparts (and accessory i.e. Mechanical seal, centrifugaland rotary pump or compressor). | PPM5/2-2.10 | 10575 |
PPM5/2-2 Maintain stationary equipment and auxiliary system (1) - Boiler /Fired Heater - Pressure Vessel/Heat Exchanger - Column - Storage Tank - Valve and Piping System/Piping Components |
11. Installation, coupling alignment, flange alignment,test run or performance test and handover (additional new rotating equipmentinstallation) | PPM5/2-2.11 | 10576 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 1. Corrective repairs are performed according to jobscope, company /manufacturer/ Health, Safety and Environment work practices,specific application and area classification | PPM5/2-3.01 | 10577 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 2. Physical inspection meets company/manufacturer/industryparameters | PPM5/2-3.02 | 10578 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 3. Confine space is verified according to standard andregulation | PPM5/2-3.03 | 10579 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 4. Configuration is verified according to the application | PPM5/2-3.04 | 10580 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 5. Calibration is verified according to engineeringspecifications with certified standards when applicable. | PPM5/2-3.05 | 10581 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 6. Functional test meets company/manufacturer/industrystandards | PPM5/2-3.06 | 10582 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 7. Known inputs result in expected outputs as specified bythe manufacturer | PPM5/2-3.07 | 10583 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 8. Documentation is completed according to companyguidelines | PPM5/2-3.08 | 10584 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 9.Equipment isprepared for maintenance work including shut down, drain, purge, clean andLock out/Tag out according to company policy | PPM5/2-3.09 | 10585 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 10. Disassembly/Assembly for repair or replace with spareparts (and accessory i.e. Mechanical seal, centrifugaland rotary pump or compressor). | PPM5/2-3.10 | 10586 |
PPM5/2-3 Maintain Sealing, Bearing, Lubrication, Transmition and Boiling | 11. Installation, coupling alignment, flange alignment,test run or performance test and handover (additional new rotating equipmentinstallation) | PPM5/2-3.11 | 10587 |
12. ความรู้และทักษะก่อนหน้าที่จำเป็น (Pre-requisite Skill & Knowledge) | |
N/A |
13. ทักษะและความรู้ที่ต้องการ (Required Skills and Knowledge) | |
(ก) ความต้องการด้านทักษะ N/A(ข) ความต้องการด้านความรู้ N/A |
14. หลักฐานที่ต้องการ (Evidence Guide) | |
N/A |
15. ขอบเขต (Range Statement) | |
N/A |
16. หน่วยสมรรถนะร่วม (ถ้ามี) | |
N/A |
17. อุตสาหกรรมร่วม/กลุ่มอาชีพร่วม (ถ้ามี) | |
N/A |
18. รายละเอียดกระบวนการและวิธีการประเมิน (Assessment Description and Procedure) | |
N/A |